BE1

BE2

BE3

BE4

BE5

BE9

BE11

BE12

BE6

BE13

BE7
Text Box: BE11 edge profile with return front apron

 

Pyrolave’s manufacture entails cutting the lavastone to the required shape, using advanced CNC technology.

A wide range of edging profiles is available, each having a slightly different influence on the appearance of the colour glazes on the contours. 

Or the edge can be left in its rough cut state, emphasising the instrinsic strength and beauty of the raw lavastone.

The stone can be escaved underneath or on top, to accommodate inserts such as sinks, deep fryers, induction units, frost tops, refrigerated cavities, which are affixed using methods suitable for their particular setting.

The stone can be carved out for built-in decorative and functional finishes,  such as drainage grooves in kitchen sink areas and non-slip grooves in bathrooms and swimming pools.

A thicker piece of lavastone is used to carve from one piece the exquisite massif vanity.

Decorative panels, tiles, and splashbacks can be cut and then re-affixed after the glaze has been applied.

 
Text Box: shapes Text Box: The raw edge of the lavastone makes a strong statement. Text Box: The carved massif vanity before glaze is applied. Text Box: The stone is escaved underneath to provide a wide edge as a seamless part of the benchtop. Text Box: The lava stone can be cut, glazed separately, then rejoined. Text Box: A sink fixed to the underside of a glazed lava benchtop. Text Box: Some edge profiles

PYROLAVE AUSTRALIA

exclusive glazed lavastone

kitchen benchtops  |  commercial installations  |  hot cold  |  bathrooms  | signs  |  indoor outdoor tops  |  architecture

colours  |  shapes  |  manufacture  |  technical data  |  in the media

home |   contact 

© 2008 Pyrolave Australia - All rights reserved

> home

> gallery

> colours

> shapes

> manufacture

> technical data

> in the media

> contact